Landtech Truck Disc Brake Pad 29087/29108 for Vehicle Part

Model NO.: 29087, 29108
Main Market: South America, North America, Eastern Europe, Mild East, Southeast Asia, Africa, Western Europe, Eastern Asia, Northern Europe, Oceania, Southern Europe, Central America, South Asia, Domestic Market
Fitting Position: Front Axle
Fitting Position-1: Rear Axle
Length [mm]: 248
Width [mm]: 109
Thickness [mm]: 30
Weight [Kg]: 10
Autoyadong: Ay200001
Wva No.: 29045, 29046, 29060, 29061, 29062, 29087
Ferodo: Fcv1373, Fcv1598, Fcv4374, Fcv1313, FC
D+Fmsi: D1203-8323
Trademark: LANDTECH
Transport Package: Carton and Pallets
Specification: SGS, ECE, TS16949
Origin: China
HS Code: 870830
Model NO.: 29087, 29108
Main Market: South America, North America, Eastern Europe, Mild East, Southeast Asia, Africa, Western Europe, Eastern Asia, Northern Europe, Oceania, Southern Europe, Central America, South Asia, Domestic Market
Fitting Position: Front Axle
Fitting Position-1: Rear Axle
Length [mm]: 248
Width [mm]: 109
Thickness [mm]: 30
Weight [Kg]: 10
Autoyadong: Ay200001
Wva No.: 29045, 29046, 29060, 29061, 29062, 29087
Ferodo: Fcv1373, Fcv1598, Fcv4374, Fcv1313, FC
D+Fmsi: D1203-8323
Trademark: LANDTECH
Transport Package: Carton and Pallets
Specification: SGS, ECE, TS16949
Origin: China
HS Code: 870830
Landtech Brake pad 29087,29059,29105 for MERCEDES BENZ,ACTROS,BOVA

Length [mm] 248
Height [mm] 109,5
Thickness [mm] 30
Supplementary Article/Supplementary Info with accessories
Quality 7083
Weight [kg] 10
1) Material friction coefficient: 100-250 ºC: 0.38-0.50; 300-350ºC:0.34-0.26;
     Wearing rate: 100-350 ºC:0.13-0.18 (10-7 cm3/N M)
 2) Brake pads hardness 91.4-95.0 HRR;
 3) Brake pad shearing strength: no bearing area, friction particle sticker area over 95%;
 4) Brake pads density: 3.0 g/cm3;
For brake lining products, our application mainly for trucks and buses, Vehicles includes trucks types for Man, Bova, Volvo,



Mercedes Benz, Daf, Scania, Dennis, Renault Truck, Renault RVI, Kassbohrer, Premium, BPW, Lucas, Iveco EuroCargo, 

Iveco Daily, Iveco EuroStar, Iveco EuroTech, Nissan, etc. 

According to the new specification GB 5763-2088 National Specification for Automotive brake lining products, 

1. Name: Truck&Bus Brake Pad, Commercial Vehicle Brake Pad, CV Brake Pad, Brake Pad

AutoYadong AY200001
WVA NO.  29059,29042,29045,29046,29060,29061,29062 ,29087,29106,29109,29105,29108,29163,29179 ,29202
FERODO  FCV1373,FCV1598,FCV4374,FCV1598,FCV1373,FCV1313,FCV1914,FCV1373,FCV1328
ICER  151194,151195
D+FMSI D1203-8323
TRW  GDB5067,GDB5063 
Back Plate Steel,Casting
Applications  MERCEDES BENZ,ACTROS,BOVA, BPW,KASBOHRER,DAF,SAF,IVECO,MAN,RENAULT 
Back Plate: Steel, Casting
Applications: MERCEDES Benz, ACTROS, BOVA,, BPW, KASBOHRER, DAF, SAF, Iveco, MAN, Renault
2. Brake Pads Material: Semi-Metal, Non-Abestos, NAO, Cerramic, Organic, Sintered, Metallic and so on
3. Available for America, Europe, Japan, Korea, Russia, Canada, Spain, and so on Vehicles.
4. Excellent radiative performance.
5. High standard heat treatment system
6. Long service life, low wear and tear, Noiseless.
7. OEM and ODM is welcome.
AutoYadong AY200001
WVA NO.  29059,29042,29045,29046,29060,29061,29062 ,29087,29106,29109,29105,29108,29163,29179 ,29202
FERODO  FCV1373,FCV1598,FCV4374,FCV1598,FCV1373,FCV1313,FCV1914,FCV1373,FCV1328
ICER  151194,151195
D+FMSI D1203-8323
TRW  GDB5067,GDB5063 
Back Plate Steel,Casting
Applications  MERCEDES BENZ,ACTROS,BOVA, BPW,KASBOHRER,DAF,SAF,IVECO,MAN,RENAULT 
Materials
The five most important characteristics that are considered when selecting a brake pad material are as follows:
1.The material's ability to resist brake fade at increased temperatures
2.The effects of water on brake fade (all brakes are designed to withstand at least temporary exposure to water)
3.The ability to recover quickly from either increased temperature or moisture
4.Service life as traded off vs. wear to the rotor
5.The ability of the material to provide smooth, even contact with the rotor or drum (rather than a material that breaks off in chunks or causes pits or dents).
For many years straightforward asbestos was viewed as having an optimal performance in all five categories. However,as the serious health-related hazards of asbestos became apparent, other materials had to be found. Today, brake pad materials are classified as belonging to one of four principal categories, as follows:
1.Non-metallic materials - these are made from a combination of various synthetic substances bonded into a composite, principally in the form of cellulose, aramid, PAN, and sintered glass. They are gentle on rotors,but produce a fair amount of dust and have a short service life.
2.Semi-metallic materials-synthetics mixed with some proportion of flaked metals. These are harder than non-metallic pads, and are more fade-resistant and longer lasting, but at the cost of increased wear to the rotor/ drum which then must be replaced sooner. They also require more force than non-metallic pads in order to generate braking torque.
3.Fully metallic materials-these pads are used only in racing vehicles, and are composed of sintered steel without any synthetic additives.They are very long-lasting, but require even more force to slow a vehicle and are extremely wearing on rotors.They also tend to be very loud.
4..Ceramic materials-Composed of clay and porcelain bonded to copper flakes and filaments, these are a good compromise between the durability of the metal pads and the grip and fade resistance of the synthetic variety. Their principal drawback, however, is that unlike the previous three types and despite the presence of the copper (which has a high thermal conductivity), ceramic pads generally do not dissipate heat well, which can eventually cause the pads or other components of the braking system to warp.However, because the ceramic materials causes the braking sound to be elevated beyond that of human hearing, they are exceptionally quiet.
There are environmental factors that govern the selection of brake pad materials. For example, the bill SSB 6557 adopted in Washington State in 2010 will limit the amount of copper that is allowed to be used in friction materials, to be eventually phased out to trace amounts, because of the negative impact of high copper levels on the aquatic life. Other materials like antimony compounds will be monitored as well.
Vehicles have different braking requirements. Friction materials offer application-specific formulas and designs. Brake pads with a higher coefficient of friction provide good braking with less brake pedal pressure requirement, but tend to lose efficiency at higher temperatures, increasing stopping distance. Brake pads with a smaller and constant coefficient of friction do not lose efficiency at higher temperatures and are stable, but require higher brake pedal pressure. Landtech Brake pad 29087,29059,29105 for MERCEDES BENZ,ACTROS,BOVA

Length [mm] 248
Height [mm] 109,5
Thickness [mm] 30
Supplementary Article/Supplementary Info with accessories
Quality 7083
Weight [kg] 10
1) Material friction coefficient: 100-250 ºC: 0.38-0.50; 300-350ºC:0.34-0.26;
     Wearing rate: 100-350 ºC:0.13-0.18 (10-7 cm3/N M)
 2) Brake pads hardness 91.4-95.0 HRR;
 3) Brake pad shearing strength: no bearing area, friction particle sticker area over 95%;
 4) Brake pads density: 3.0 g/cm3;
For brake lining products, our application mainly for trucks and buses, Vehicles includes trucks types for Man, Bova, Volvo,



Mercedes Benz, Daf, Scania, Dennis, Renault Truck, Renault RVI, Kassbohrer, Premium, BPW, Lucas, Iveco EuroCargo, 

Iveco Daily, Iveco EuroStar, Iveco EuroTech, Nissan, etc. 

According to the new specification GB 5763-2088 National Specification for Automotive brake lining products, 

1. Name: Truck&Bus Brake Pad, Commercial Vehicle Brake Pad, CV Brake Pad, Brake Pad

AutoYadong AY200001
WVA NO.  29059,29042,29045,29046,29060,29061,29062 ,29087,29106,29109,29105,29108,29163,29179 ,29202
FERODO  FCV1373,FCV1598,FCV4374,FCV1598,FCV1373,FCV1313,FCV1914,FCV1373,FCV1328
ICER  151194,151195
D+FMSI D1203-8323
TRW  GDB5067,GDB5063 
Back Plate Steel,Casting
Applications  MERCEDES BENZ,ACTROS,BOVA, BPW,KASBOHRER,DAF,SAF,IVECO,MAN,RENAULT 
Back Plate: Steel, Casting
Applications: MERCEDES Benz, ACTROS, BOVA,, BPW, KASBOHRER, DAF, SAF, Iveco, MAN, Renault
2. Brake Pads Material: Semi-Metal, Non-Abestos, NAO, Cerramic, Organic, Sintered, Metallic and so on
3. Available for America, Europe, Japan, Korea, Russia, Canada, Spain, and so on Vehicles.
4. Excellent radiative performance.
5. High standard heat treatment system
6. Long service life, low wear and tear, Noiseless.
7. OEM and ODM is welcome.
AutoYadong AY200001
WVA NO.  29059,29042,29045,29046,29060,29061,29062 ,29087,29106,29109,29105,29108,29163,29179 ,29202
FERODO  FCV1373,FCV1598,FCV4374,FCV1598,FCV1373,FCV1313,FCV1914,FCV1373,FCV1328
ICER  151194,151195
D+FMSI D1203-8323
TRW  GDB5067,GDB5063 
Back Plate Steel,Casting
Applications  MERCEDES BENZ,ACTROS,BOVA, BPW,KASBOHRER,DAF,SAF,IVECO,MAN,RENAULT 
Materials
The five most important characteristics that are considered when selecting a brake pad material are as follows:
1.The material's ability to resist brake fade at increased temperatures
2.The effects of water on brake fade (all brakes are designed to withstand at least temporary exposure to water)
3.The ability to recover quickly from either increased temperature or moisture
4.Service life as traded off vs. wear to the rotor
5.The ability of the material to provide smooth, even contact with the rotor or drum (rather than a material that breaks off in chunks or causes pits or dents).
For many years straightforward asbestos was viewed as having an optimal performance in all five categories. However,as the serious health-related hazards of asbestos became apparent, other materials had to be found. Today, brake pad materials are classified as belonging to one of four principal categories, as follows:
1.Non-metallic materials - these are made from a combination of various synthetic substances bonded into a composite, principally in the form of cellulose, aramid, PAN, and sintered glass. They are gentle on rotors,but produce a fair amount of dust and have a short service life.
2.Semi-metallic materials-synthetics mixed with some proportion of flaked metals. These are harder than non-metallic pads, and are more fade-resistant and longer lasting, but at the cost of increased wear to the rotor/ drum which then must be replaced sooner. They also require more force than non-metallic pads in order to generate braking torque.
3.Fully metallic materials-these pads are used only in racing vehicles, and are composed of sintered steel without any synthetic additives.They are very long-lasting, but require even more force to slow a vehicle and are extremely wearing on rotors.They also tend to be very loud.
4..Ceramic materials-Composed of clay and porcelain bonded to copper flakes and filaments, these are a good compromise between the durability of the metal pads and the grip and fade resistance of the synthetic variety. Their principal drawback, however, is that unlike the previous three types and despite the presence of the copper (which has a high thermal conductivity), ceramic pads generally do not dissipate heat well, which can eventually cause the pads or other components of the braking system to warp.However, because the ceramic materials causes the braking sound to be elevated beyond that of human hearing, they are exceptionally quiet.
There are environmental factors that govern the selection of brake pad materials. For example, the bill SSB 6557 adopted in Washington State in 2010 will limit the amount of copper that is allowed to be used in friction materials, to be eventually phased out to trace amounts, because of the negative impact of high copper levels on the aquatic life. Other materials like antimony compounds will be monitored as well.
Vehicles have different braking requirements. Friction materials offer application-specific formulas and designs. Brake pads with a higher coefficient of friction provide good braking with less brake pedal pressure requirement, but tend to lose efficiency at higher temperatures, increasing stopping distance. Brake pads with a smaller and constant coefficient of friction do not lose efficiency at higher temperatures and are stable, but require higher brake pedal pressure.

According to the structure, it is mainly divided into four columns, single column (C type), horizontal, vertical frame, universal hydraulic press and so on.

According to the application, it is mainly divided into metal forming, bending, stretching, punching, powder (metal, non-metal) molding, press fitting, extrusion and the like.

Hot Forging Hydraulic Press

The large forging hydraulic press is a forging device capable of performing various free forging processes and is one of the most widely used equipment in the forging industry. At present, there are 800T, 1600T, 2000T, 2500T, 3150T, 4000T, 5000T and other series of forging hydraulic presses.

Four-column hydraulic press

The hydraulic press is suitable for the pressing process of plastic materials. Such as powder product molding, plastic product molding, cold (hot) extrusion metal forming, sheet stretching and cross-pressure, bending, turning, correction and other processes.

The four-column hydraulic press can be divided into four-column two-beam hydraulic press, four-column three-beam hydraulic press, and four-column four-beam hydraulic press.

Single arm hydraulic press (single column hydraulic press)

Expandable working range, use three-sided space, lengthen hydraulic cylinder stroke (optional), maximum retractable 260mm-800mm, preset working pressure; hydraulic system heat sink.

Gantry hydraulic press

It can assemble, disassemble, straighten, calender, stretch, bend, punch and so on the machine parts, and truly realize the multi-purpose of one machine. The machine table can move up and down, the size expands the opening and closing height of the machine, and the use is more convenient.

Double column hydraulic press

This series of products are suitable for press fitting, bending and shaping, stamping and indentation, flanging, punching and shallow drawing of small parts; forming process of metal powder products. It adopts electric control, with jog and semi-automatic circulation, which can maintain pressure delay, and has good slider guiding, easy to operate, easy to maintain, economical and durable. According to the needs of users, it can add functions such as thermal instrument, ejection cylinder, stroke digital display and counting.

Others C Type Hydraulic Press

Others C Type Hydraulic Press, C Type Hydraulic Press Machine,C Type Hydraulic Press 40T,C Type Hydraulic Press 50T

CHENGDU ZHENGXI HYDRAULIC EQUIPMENT MANUFACTURING CO., LTD. , http://www.zxhydraulic.com