Dongfeng 3 tons with lifting wrecker compared to Dongfeng 4 tons with lifting wrecker

Dongfeng Dollyka 3 ton with hanging flat wrecker configuration:

The chassis has a wheelbase of 4,400 and a sun-driving engine CY4102-CE4C engine.

Xugong's 3.2-ton three-section straight-arm lift has a height of 9.5 meters and a working radius of 7.56 meters.

Top 3P2A folding punching flat plate, one drag type.

\

\

Dongfeng Capt 3 ton with hanging flat wrecker configuration:

Chassis configuration: 4400 wheelbase, Cummins ISB3.9-125E40A engine.

Xugong's 3.2-ton three-section straight-arm lift has a height of 9.5 meters and a working radius of 7.56 meters.

Top 3P2A folding punching flat plate, one drag type.

\

\

Dongfeng Tianjin 5 tons one to two belt lifting wrecker country four ISDe180 40 engine, DF6S900 gearbox, 9.00R20 tire, wheelbase 5600, 250 × 80 × [7 + 4] steel 160, with PTO, remote throttle interface. 5-ton three-section straight-arm crane, lifting height 7.4 meters, working radius 8.5 meters, full hydraulic. Full rotation. Optional 6.3 tons crane.

\

\

\

(This article comes from Xiagong Chusheng)

Functional features:

The machine is made up of a stepless speed variable winding chuck and a hydraulic lifting platform. No any pit should be construced in foundation and the chuck need not lift. According to customer requirements can be arranged into a pie wire, tensioning unit, accessories and operators could load on the platform, which enables a constant operating altitude. This machine is suitable for regions wit high level of underground water or workshop unsuitable for pit.

Application:

Over floor Vertical Winding Machine is applied to coil winding for large and middle capacity transformers.

 

Vertical Winding Machine

Wire Winding Machine,Vertical Winding Machine,Wire Cutting Machine,Automatic Vertical Winding Machine

JINAN EURO-ASIA INT'L CO., LTD , https://www.eaelectricmachine.com